SND1000 Multi Channel Dust Analyzer

SND1000 Multi Channel Dust Analyzer

NovaSensor SND1000 aerosol monitor is a dust particle detector developed based on the principle of single particle laser scattering. The instrument has a wide range of air dust concentration detection, and is portable for desktop touch use, also known as a portable dust concentration detector. It is suitable for measurement from offices, workplaces to outdoor environments, construction sites, and other occasions. It is a standard comparison device for environmental dust sensors.
This portable dust concentration detector can measure suspended particles PM₁ and PM₂.₅, PM₄, PM₁₀ and TSP mass concentrations provide rapid and accurate measurement results.
Compared to traditional dust particle detectors, NovaSensor SND1000 portable dust concentration detector has higher measurement accuracy and particle size resolution, and has stronger resistance to humidity effects.

Product Introduction

Function Characteristics

●  5 channels: real-time measurement of 1.0µm, 2.Sµm, 4µm, 1 Oµm and TSP mass concentration

●  Long term operation: Designed for long time operation, can be 7*24 hours continuous monitoring

●  Convenient data collection: Equipped with 4G communication and IoT platform as standard, and multiple data interfaces

●  Super long endurance: More than 20 hours of endurance

●  Circuit protection: Over current, over voltage, anti-reverse protection, 485 anti-need protection

●  Easy to operate: 8-inch color display, full touch screen operation, real-time reading

●  Strong reliability: Adopting sensor array design

Application Scenarios

Nova SND1000 aerosol monitor is suitable for laboratory atmospheric particle research, suspended particle detection, pollution source analysis, migration particle measurement, medical and health testing, factory emissions and environmental big data monitoring, as well as clean workshop testing in pharmaceuticals, electronics, food processing, precision processing and other industries.Nova SND1000 aerosol monitor can be used as a standard comparison instrument for laser particle detection equipment, for calibrating data, and is a standard dust analyzer.

Technical Parameter

NO.ProjectParameterNotes
1Range0~100mg/m³TSP
2Resolution0.1μg/m³
3Output channelPM₁ 、PM25、PM4、PM10、TSP
4Ampling flow≥1L/min
5Temp.Range-20℃~60℃
6Humidity range0~99%RH
7Working AP86KPa~110KPa
8InterfaceUSB,4G,RS485,Ethernet
9Battery flow15000mAh/16.8VCan work more than 20 hours
10Relative error±10%&±8μg/m³MAX@PM₂.5@25℃,50%RH
11Screen size8 inch
12Product size395*288*219mm

Recommended products

Product Categories

Contact us

官网询盘

Best-selling products

官网询盘